Safe mode 2.1 serial

This example demonstrates how to recover the module if it enters Safe Mode. It is extremely important for a host application to handle safe mode operation. In safe mode, the commands available to the host are purposely restricted to simplify the recovery process. If you can enter into Windows 10 system, you can also try another way to boot into Safe Mode in Windows 10, namely, using Windows System Configuration msconfig.

Then you can click Boot tab. Under Boot options , you can choose a preferred Safe boot option based on your own need. Generally, you can choose either Minimal or Network option to start Windows 10 in Safe Mode to troubleshoot problems in Windows 10 system.

Also learn how to change Windows 11 password. Step 1. You can press and hold Shift key on the keyboard, and click Start menu on Windows 10 at the same time. Then click the Power icon in the Start menu and choose Restart. Step 2. Step 3. You can restart the Windows 10 PC. After the Windows 10 PC restarts, you can see a list of Windows startup options. You can press and hold the Power button on your PC for 10 seconds to turn off the computer, then turn on the PC by pressing the Power button again.

When the computer is going to boot the operating system e. Follow the same process to turn off and on your Windows 10 PC 3 times. When the PC is turned on for the third time, the computer should enter into the Automatic Repair window now. If not, follow the same steps until the WinRE screen shows. And this is a suggested option when you need to troubleshoot a black or blank computer screen. You can search on the Internet for solutions to the issues.

If for some reason, your device does not boot properly, you can use a system recovery drive to boot to safe mode. It is wise to create a recovery drive before you encounter any problems. You can create a recovery drive from another computer running Windows Plug in the USB memory stick or the external hard drive where you want to create a recovery drive, and wait for Windows to detect it.

You will be warned that everything on the drive will be erased. An indicator bar will update you on the progress. Plug in the Recovery Drive into the computer that would not boot properly. Once plugged, turn on or restart your computer. The computer will boot from your USB flash drive. When asked to press any key, do so. The contents of the recovery drive will load.

Choose your preferred keyboard layout from the screen that appears. Go to Startup Settings. On the Choose an Option screen, click the Troubleshoot icon. On the next screen that appears after you click Troubleshoot, click the Advanced Options icon. After a few minutes, the Startup Settings screen will appear. Method 4. Turn on your computer. This is still possible in Windows 10 but rather difficult because Windows 10 loads very fast. This is the tricky part since Windows 10 loads very fast.

You may have to try this a couple of times, and this is not possible with newer computers. Choose Advanced Repair Options. Restart to Advanced Boot options. Your computer will reboot and open the Advanced Boot Options screen. Choose the Safe Boot option that you want. Note that the interface of the Advanced Boot Option is not a graphical interface. You navigate to the various options using the Up or Down arrow key.

Your choice will be highlighted as you move the arrow key up or down. Method 5. Use this if your computer will not boot up at all. If a problem doesn't happen in safe mode, this means that default settings and basic device drivers aren't causing the issue. Observing Windows in safe mode enables you to narrow down the source of a problem, and can help you troubleshoot problems on your PC.

Safe Mode with Networking adds the network drivers and services you'll need to access the internet and other computers on your network. Select from the following sections to find out how to start your PC in safe mode from Settings, from the sign-in screen, or from a black or blank screen. If that doesn't work, select the Start button, then select Settings. Open Recovery Settings. Under Recovery options , next to Advanced startup , select Restart now.

You may be asked to enter your BitLocker recovery key. After your PC restarts, you'll see a list of options. Or if you'll need to use the internet, select 5 or press F5 for Safe Mode with Networking. Select 4 or F4 to start your PC in safe mode.